INT-280 60Bar

Electronic oil level control INT280 - 60 Bar Diagnose 1m



Article category electrical part
Supply voltage AC 24V-230V
Permitted ambient temperature -30...+60°C
Media temperature -30…+100°C
Permissible relative humidity 10-95% r. h. no condensation
Operating pressure -1...+60bar
Test pressure 90bar
Differential pressure 1-25bar
Relay: Connection AC 240V 2.5A C300 at least AC/DC 24V 20mA
Relay: Mechanical service life Approx. 1 million switching cycles
Interface Diagnose port (DP)
Protection class acc. To EN 60529 IP65 (DP cable or cover has to be installed)
Supply: electrical Cable 6xAWG-18, L=1m
Supply: Oil 7/16"-20 UNF
Flow rate through valve 1l/min (water 20°C, 1bar differential pressure)
Housing material Aluminium PA glass-fibre-reinforced
Mounting Flange (3-/4-hole)
Oils Mineral and ester oils without additives
Refrigerant non-corrosive, non-flammable
Mounting position Horizontal (rotatable by 180°), ±2°
Dimensions See dimensions in mm
Weight Approx. 1400g
Check base EN 61000-6-2, EN 61000-6-3EN 61010-1 Overvoltage category II Pollution level 2